Technology World

welcome to our blog

We are Magcro

Carousel

Posts

Comments

The Team

Blog Journalist

Connect With Us

Join To Connect With Us

Portfolio

    Posted by: Tech world Posted date: 3:56 PM / comment : 0




    Troubleshooting Your Computer Can Not Booting






    When you press the power button, the computer you want to live, but not the operating system is active (show up). That looks just dark colors on the monitor.
    Noteworthy is, whether there is a sign of sound (beep sound) from your computer speakers? If anything, it marked the BIOS installed on the motherboard to POST (Power On Self Test) when the computer is powered on and successfully detected the presence of kesalahan.Perhatikan sound, then skewer with beeps list below.

    Beep 1 time = Komdisi normal computer
    Beeps 1 time, length = There is a problem on your PC's memory (RAM)
    Beep a long time, 3 times shorter = Problems found on the VGA card
    If you hear the beep above, the following steps you need to do:
    1. Turn off your PC, unplug all cables, then open the casing2. If that is detected is a sign of damage beeps with memory, you can perform checks on the card is installed in slot memory.Apakah with benar.Buka key slot and remove the memory card from the slot, make sure no damage to the card memori.Anda can see it physically, which decides whether there is a scratch on the copper lines your memory card.3. If you hear is a beep that indicates damage to the VGA, try to check the position of the VGA card on slotnya.Lakukan checks like checking on the memory card.4. Check the motherboard, if there is a possible pathway scratches on the motherboard terputus.Periksa copper wires that are contained on a PC, whether the appropriate position and connected properly.5. If checks on memory and VGA card has been completed and there is no physical damage, try to plug back into their slots each slot is locked and do not forget to return your computer benar.Nyalakan.6. If the incident is still the same, you can swap memory or the VGA card to another slot slot that rusak.Nyalakan tersedia.Kemungkinan computer again.

    Please note, that in each BIOS beep codes are different. But until recently, the method most often performed to detect damage to the computer at boot time.

    icon allbkg

    Tagged with:

    Next
    Newer Post
    Previous
    Older Post

    No comments:

    Leave a Reply

Thursday, November 17, 2011 0 Tech world



Troubleshooting Your Computer Can Not Booting






When you press the power button, the computer you want to live, but not the operating system is active (show up). That looks just dark colors on the monitor.
Noteworthy is, whether there is a sign of sound (beep sound) from your computer speakers? If anything, it marked the BIOS installed on the motherboard to POST (Power On Self Test) when the computer is powered on and successfully detected the presence of kesalahan.Perhatikan sound, then skewer with beeps list below.

Beep 1 time = Komdisi normal computer
Beeps 1 time, length = There is a problem on your PC's memory (RAM)
Beep a long time, 3 times shorter = Problems found on the VGA card
If you hear the beep above, the following steps you need to do:
1. Turn off your PC, unplug all cables, then open the casing2. If that is detected is a sign of damage beeps with memory, you can perform checks on the card is installed in slot memory.Apakah with benar.Buka key slot and remove the memory card from the slot, make sure no damage to the card memori.Anda can see it physically, which decides whether there is a scratch on the copper lines your memory card.3. If you hear is a beep that indicates damage to the VGA, try to check the position of the VGA card on slotnya.Lakukan checks like checking on the memory card.4. Check the motherboard, if there is a possible pathway scratches on the motherboard terputus.Periksa copper wires that are contained on a PC, whether the appropriate position and connected properly.5. If checks on memory and VGA card has been completed and there is no physical damage, try to plug back into their slots each slot is locked and do not forget to return your computer benar.Nyalakan.6. If the incident is still the same, you can swap memory or the VGA card to another slot slot that rusak.Nyalakan tersedia.Kemungkinan computer again.

Please note, that in each BIOS beep codes are different. But until recently, the method most often performed to detect damage to the computer at boot time.

You may also like

No comments :

Leave a Reply

Comments

The Visitors says